#include "u.h"
#include "../port/lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "io.h"
#include "../port/error.h"

#include <image.h>
#include <memimage.h>
#include "vga.h"

extern Memimage gscreen;

static Lock et4000pagelock;
static ulong storage;
static Point hotpoint;
static Point lastp={-1,-1};
static int cursordup;
static int ncmove, ncloop, nccall;

static void
setet4000page(int page)
{
	uchar p;

	p = page & 0x0F;
	p |= p<<4;
	outb(0x3CD, p);

	p = (page & 0x30);
	p |= p>>4;
	outb(0x3CB, p);
}

#ifdef YYY
static void
disable(void)
{
	uchar imaF7;

	outb(0x217A, 0xF7);
	imaF7 = inb(0x217B) & ~0x80;
	outb(0x217B, imaF7);
	lastp.x = lastp.y = -1;
}

static void
enable(void)
{
	uchar imaF7;

	disable();

	/*
	 * Configure CRTCB for Sprite, 64x64,
	 * CRTC pixel overlay.
	 */
	outb(0x217A, 0xEF);
	outb(0x217B, 0x02);

	/*
	 * Cursor goes in the top left corner
	 * of the Sprite area, so the horizontal and
	 * vertical presets are 0.
	 */
	outb(0x217A, 0xE2);
	outb(0x217B, 0x00);
	outb(0x217A, 0xE3);
	outb(0x217B, 0x00);

	outb(0x217A, 0xE6);
	outb(0x217B, 0x00);
	outb(0x217A, 0xE7);
	outb(0x217B, 0x00);

	/*
	 * Find a place for the cursor data in display memory.
	 * Must be on a "doubleword" boundary, but put it on a
	 * 1024-byte boundary so that there's no danger of it
	 * crossing a page.
	 */
	storage = (gscreen.width*BY2WD*gscreen.r.max.y+1023)/1024;
	storage *= 1024/4;
	outb(0x217A, 0xE8);
	outb(0x217B, storage & 0xFF);
	outb(0x217A, 0xE9);
	outb(0x217B, (storage>>8) & 0xFF);
	outb(0x217A, 0xEA);
	outb(0x217B, (storage>>16) & 0x0F);
	storage *= 4;

	/*
	 * Row offset in "quadwords". Must be 2 for Sprite.
	 * Bag the pixel-panning.
	 * Colour depth, must be 2 for Sprite.
	 */
	outb(0x217A, 0xEB);
	outb(0x217B, 0x02);
	outb(0x217A, 0xEC);
	outb(0x217B, 0x00);

	outb(0x217A, 0xED);
	outb(0x217B, 0x00);

	outb(0x217A, 0xEE);
	if(vgascreen.ldepth == 3)
		outb(0x217B, 0x01);
	else
		outb(0x217B, 0x00);

	/*
	 * Enable the CRTCB/Sprite.
	 */
	outb(0x217A, 0xF7);
	imaF7 = inb(0x217B);
	outb(0x217B, 0x80|imaF7);
}

static void
load(Cursor *c)
{
	uchar p0, p1, *mem;
	int i, x, y;
	ushort p;
	uchar clr[2*16], set[2*16];

	/*
	 * Lock the display memory so we can update the
	 * cursor bitmap if necessary.
	 */
	lock(&et4000pagelock);

	/*
	 * Disable the cursor.
	 * Set the display page (do we need to restore
	 * the current contents when done?) and the
	 * pointer to the two planes. What if this crosses
	 * into a new page?
	 */
	disable();

	setet4000page(storage>>16);
	mem = ((uchar*)vgascreen.base) + (storage & 0xFFFF);

	/*
	 * Initialise the 64x64 cursor RAM array. There are 2 planes,
	 * p0 and p1. Data is written 4 pixels per byte, with p1 the
	 * MS bit of each pixel.
	 * The cursor mode gives the following truth table:
	 *	p1 p0	colour
	 *	 0  0	Sprite Colour 0 (defined as 0x00)
	 *	 0  1	Sprite Colour 1 (defined as 0xFF)
	 *	 1  0	Transparent (allow CRTC pixel pass through)
	 *	 1  1	Invert (allow CRTC pixel invert through)
	 * Put the cursor into the top-left of the 64x64 array.
	 */
	for(y = 0; y < 64; y++){
		for(x = 0; x < 64/8; x++){
			if(x < 16/8 && y < 16){
				p0 = c->clr[x+y*2];
				p1 = c->set[x+y*2];

				p = 0x0000;
				for(i = 0; i < 8; i++){
					if(p1 & (1<<(7-i)))
						;
					else if(p0 & (1<<(7-i)))
						p |= 0x01<<(2*i);
					else
						p |= 0x02<<(2*i);
				}
				*mem++ = p & 0xFF;
				*mem++ = (p>>8) & 0xFF;
			}
			else {
				*mem++ = 0xAA;
				*mem++ = 0xAA;
			}
		}
	}

	/*
	 * Set the cursor hotpoint and enable the cursor.
	 */
	hotpoint = c->offset;
	outb(0x217A, 0xF7);
	p = inb(0x217B)|0x80;
	outb(0x217B, p);

	unlock(&et4000pagelock);
}

static void
move(int cx, int cy)
{
	int x, xo, y, yo;

	if(cx==lastp.x && cy==lastp.y)
		return;
	lastp.x = cx;
	lastp.y = cy;
	if(canlock(&et4000pagelock) == 0)
		return;
	/*
	 * Mustn't position the cursor offscreen even partially,
	 * or it disappears. Therefore, if x or y is -ve, adjust the
	 * cursor presets instead.
	 */
	if((x = p.x+hotpoint.x) < 0){
		xo = -x;
		x = 0;
	}
	else
		xo = 0;
	if((y = p.y+hotpoint.y) < 0){
		yo = -y;
		y = 0;
	}
	else
		yo = 0;

	/*
	 * The cursor image is jerky if we don't do this.
	 * The cursor information is probably fetched from
	 * display memory during the horizontal blank active
	 * time and it doesn't like it if the coordinates
	 * are changed underneath.
	 */
	while((vgai(Status1) & 0x08) == 0)
		;

	outb(0x217A, 0xE2);
	outb(0x217B, xo);

	outb(0x217A, 0xE6);
	outb(0x217B, yo);

	outb(0x217A, 0xE1);
	outb(0x217B, (x>>8) & 0xFF);
	outb(0x217A, 0xE0);
	outb(0x217B, x & 0xFF);
	outb(0x217A, 0xE5);
	outb(0x217B, (y>>8) & 0xFF);
	outb(0x217A, 0xE4);
	outb(0x217B, y & 0xFF);
	unlock(&et4000pagelock);
	return 0;
}
#endif

static void
et4000page(int page)
{
	static int lastp = -1;

	if(page == lastp)
		return;
//	lock(&et4000pagelock);
	setet4000page(page);
//	unlock(&et4000pagelock);
}

static void
et4000init(Mode*)
{
}

static int
et4000ident(void)
{
	static char ident[] = "Tseng Laboratories, Inc. ";
	char *p;
	int i;

	p = KADDR(0xC0076);
	for(i=0; ident[i]; i++)
		if(*p++ != ident[i])
			return 0;
	return 1;
}

static Vgac et4000 = {
	"et4000",
	et4000page,
	et4000init,
	et4000ident,
};
/*
	enable,
	disable,
	move,
	load,

	0,
};*/

void
vgaet4000link(void)
{
	static int once;

	if(once == 0)
		addvgaclink(&et4000);
	once = 1;
}