/* * USB Human Interaction Device: keyboard and mouse. * * If there's no usb keyboard, it tries to setup the mouse, if any. * It should be started at boot time. * * Mouse events are converted to the format of mouse(3)'s mousein file. * Keyboard keycodes are translated to scan codes and sent to kbin(3). * * If there is no keyboard, it tries to setup the mouse properly, else it falls * back to boot protocol. */ #include #include #include #include "usb.h" #include "hid.h" enum { Awakemsg= 0xdeaddead, Diemsg = 0xbeefbeef, Dwcidle = 8, }; typedef struct KDev KDev; typedef struct Kin Kin; struct KDev { Dev* dev; /* usb device*/ Dev* ep; /* endpoint to get events */ Kin* in; /* used to send events to kernel */ int idle; /* min time between reports (× 4ms) */ Channel*repeatc; /* only for keyboard */ int accel; /* only for mouse */ int bootp; /* has associated keyboard */ int debug; HidRepTempl templ; int (*ptrvals)(KDev *kd, Chain *ch, int *px, int *py, int *pb); }; /* * Kbdin and mousein files must be shared among all instances. */ struct Kin { int ref; int fd; char* name; }; /* * Map for the logitech bluetooth mouse with 8 buttons and wheels. * { ptr ->mouse} * { 0x01, 0x01 }, // left * { 0x04, 0x02 }, // middle * { 0x02, 0x04 }, // right * { 0x40, 0x08 }, // up * { 0x80, 0x10 }, // down * { 0x10, 0x08 }, // side up * { 0x08, 0x10 }, // side down * { 0x20, 0x02 }, // page * besides wheel and regular up/down report the 4th byte as 1/-1 */ /* * key code to scan code; for the page table used by * the logitech bluetooth keyboard. */ static char sctab[256] = { [0x00] 0x0, 0x0, 0x0, 0x0, 0x1e, 0x30, 0x2e, 0x20, [0x08] 0x12, 0x21, 0x22, 0x23, 0x17, 0x24, 0x25, 0x26, [0x10] 0x32, 0x31, 0x18, 0x19, 0x10, 0x13, 0x1f, 0x14, [0x18] 0x16, 0x2f, 0x11, 0x2d, 0x15, 0x2c, 0x2, 0x3, [0x20] 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, [0x28] 0x1c, 0x1, 0xe, 0xf, 0x39, 0xc, 0xd, 0x1a, [0x30] 0x1b, 0x2b, 0x2b, 0x27, 0x28, 0x29, 0x33, 0x34, [0x38] 0x35, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, [0x40] 0x41, 0x42, 0x43, 0x44, 0x57, 0x58, 0x63, 0x46, [0x48] 0x77, 0x52, 0x47, 0x49, 0x53, 0x4f, 0x51, 0x4d, [0x50] 0x4b, 0x50, 0x48, 0x45, 0x35, 0x37, 0x4a, 0x4e, [0x58] 0x1c, 0x4f, 0x50, 0x51, 0x4b, 0x4c, 0x4d, 0x47, [0x60] 0x48, 0x49, 0x52, 0x53, 0x56, 0x7f, 0x74, 0x75, [0x68] 0x55, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, [0x70] 0x78, 0x79, 0x7a, 0x7b, 0x0, 0x0, 0x0, 0x0, [0x78] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x71, [0x80] 0x73, 0x72, 0x0, 0x0, 0x0, 0x7c, 0x0, 0x0, [0x88] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0x90] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0x98] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xa0] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xa8] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xb0] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xb8] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xc0] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xc8] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xd0] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xd8] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xe0] 0x1d, 0x2a, 0x38, 0x7d, 0x61, 0x36, 0x64, 0x7e, [0xe8] 0x0, 0x0, 0x0, 0x0, 0x0, 0x73, 0x72, 0x71, [0xf0] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, [0xf8] 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, }; static QLock inlck; static Kin kbdin = { .ref = 0, .name = "#Ι/kbin", .fd = -1, }; static Kin ptrin = { .ref = 0, .name = "#m/mousein", .fd = -1, }; static int ptrbootpvals(KDev *kd, Chain *ch, int *px, int *py, int *pb); static int ptrrepvals(KDev *kd, Chain *ch, int *px, int *py, int *pb); static int setbootproto(KDev* f, int eid, uchar *, int) { int nr, r, id; f->ptrvals = ptrbootpvals; r = Rh2d|Rclass|Riface; dprint(2, "setting boot protocol\n"); id = f->dev->usb->ep[eid]->iface->id; nr = usbcmd(f->dev, r, Setproto, Bootproto, id, nil, 0); if(nr < 0) return -1; usbcmd(f->dev, r, Setidle, f->idle<<8, id, nil, 0); return nr; } static uchar ignoredesc[128]; static int setfirstconfig(KDev* f, int eid, uchar *desc, int descsz) { int nr, r, id, i; dprint(2, "setting first config\n"); if(desc == nil){ descsz = sizeof ignoredesc; desc = ignoredesc; } id = f->dev->usb->ep[eid]->iface->id; r = Rh2d | Rstd | Rdev; nr = usbcmd(f->dev, r, Rsetconf, 1, 0, nil, 0); if(nr < 0) return -1; r = Rh2d | Rclass | Riface; nr = usbcmd(f->dev, r, Setidle, f->idle<<8, id, nil, 0); if(nr < 0) return -1; r = Rd2h | Rstd | Riface; nr=usbcmd(f->dev, r, Rgetdesc, Dreport<<8, id, desc, descsz); if(nr <= 0) return -1; if(f->debug){ fprint(2, "report descriptor:"); for(i = 0; i < nr; i++){ if(i%8 == 0) fprint(2, "\n\t"); fprint(2, "%#2.2ux ", desc[i]); } fprint(2, "\n"); } f->ptrvals = ptrrepvals; return nr; } /* * Try to recover from a babble error. A port reset is the only way out. * BUG: we should be careful not to reset a bundle with several devices. */ static void recoverkb(KDev *f) { int i; close(f->dev->dfd); /* it's for usbd now */ devctl(f->dev, "reset"); for(i = 0; i < 10; i++){ if(i == 5) f->bootp++; sleep(500); if(opendevdata(f->dev, ORDWR) >= 0){ if(f->bootp) /* TODO func pointer */ setbootproto(f, f->ep->id, nil, 0); else setfirstconfig(f, f->ep->id, nil, 0); break; } /* else usbd still working... */ } } static void kbfatal(KDev *kd, char *sts) { Dev *dev; if(sts != nil) fprint(2, "kb: fatal: %s\n", sts); else fprint(2, "kb: exiting\n"); if(kd->repeatc != nil) nbsendul(kd->repeatc, Diemsg); dev = kd->dev; kd->dev = nil; if(kd->ep != nil) closedev(kd->ep); kd->ep = nil; devctl(dev, "detach"); closedev(dev); /* * free(kd); done by closedev. */ threadexits(sts); } static int scale(KDev *f, int x) { int sign = 1; if(x < 0){ sign = -1; x = -x; } switch(x){ case 0: case 1: case 2: case 3: break; case 4: x = 6 + (f->accel>>2); break; case 5: x = 9 + (f->accel>>1); break; default: x *= MaxAcc; break; } return sign*x; } /* * ps2 mouse is processed mostly at interrupt time. * for usb we do what we can. */ static void sethipri(void) { char fn[30]; int fd; snprint(fn, sizeof fn, "/proc/%d/ctl", getpid()); fd = open(fn, OWRITE); if(fd >= 0) { fprint(fd, "pri 13"); close(fd); } } static int ptrrepvals(KDev *kd, Chain *ch, int *px, int *py, int *pb) { int i, x, y, b, c; static char buts[] = {0x0, 0x2, 0x1}; c = ch->e / 8; /* sometimes there is a report id, sometimes not */ if(c == kd->templ.sz + 1) if(ch->buf[0] == kd->templ.id) ch->b += 8; else return -1; parsereport(&kd->templ, ch); if(kd->debug > 1) dumpreport(&kd->templ); if(c < 3) return -1; x = hidifcval(&kd->templ, KindX, 0); y = hidifcval(&kd->templ, KindY, 0); b = 0; for(i = 0; itempl, KindButtons, i) & 1) << buts[i]; if(c > 3 && hidifcval(&kd->templ, KindWheel, 0) > 0) /* up */ b |= 0x10; if(c > 3 && hidifcval(&kd->templ, KindWheel, 0) < 0) /* down */ b |= 0x08; *px = x; *py = y; *pb = b; return 0; } static int ptrbootpvals(KDev *kd, Chain *ch, int *px, int *py, int *pb) { int b, c; char x, y; static char maptab[] = {0x0, 0x1, 0x4, 0x5, 0x2, 0x3, 0x6, 0x7}; c = ch->e / 8; if(c < 3) return -1; if(kd->templ.nifcs){ x = hidifcval(&kd->templ, KindX, 0); y = hidifcval(&kd->templ, KindY, 0); }else{ /* no report descriptor for boot protocol */ x = ((signed char*)ch->buf)[1]; y = ((signed char*)ch->buf)[2]; } b = maptab[ch->buf[0] & 0x7]; if(c > 3 && ch->buf[3] == 1) /* up */ b |= 0x08; if(c > 3 && ch->buf[3] == 0xff) /* down */ b |= 0x10; *px = x; *py = y; *pb = b; return 0; } static void ptrwork(void* a) { int hipri, mfd, nerrs, x, y, b, c, ptrfd; char mbuf[80]; Chain ch; KDev* f = a; threadsetname("ptr %s", f->ep->dir); hipri = nerrs = 0; ptrfd = f->ep->dfd; mfd = f->in->fd; if(f->ep->maxpkt < 3 || f->ep->maxpkt > MaxChLen) kbfatal(f, "weird mouse maxpkt"); for(;;){ memset(ch.buf, 0, MaxChLen); if(f->ep == nil) kbfatal(f, nil); c = read(ptrfd, ch.buf, f->ep->maxpkt); assert(f->dev != nil); assert(f->ep != nil); if(c < 0){ dprint(2, "kb: mouse: %s: read: %r\n", f->ep->dir); if(++nerrs < 3){ recoverkb(f); continue; } } if(c <= 0) kbfatal(f, nil); ch.b = 0; ch.e = 8 * c; if(f->ptrvals(f, &ch, &x, &y, &b) < 0) continue; if(f->accel){ x = scale(f, x); y = scale(f, y); } if(f->debug > 1) fprint(2, "kb: m%11d %11d %11d\n", x, y, b); seprint(mbuf, mbuf+sizeof(mbuf), "m%11d %11d %11d", x, y,b); if(write(mfd, mbuf, strlen(mbuf)) < 0) kbfatal(f, "mousein i/o"); if(hipri == 0){ sethipri(); hipri = 1; } } } static void stoprepeat(KDev *f) { sendul(f->repeatc, Awakemsg); } static void startrepeat(KDev *f, uchar esc1, uchar sc) { ulong c; if(esc1) c = SCesc1 << 8 | (sc & 0xff); else c = sc; sendul(f->repeatc, c); } static void putscan(KDev *f, uchar esc, uchar sc) { int kbinfd; uchar s[2] = {SCesc1, 0}; kbinfd = f->in->fd; if(sc == 0x41){ f->debug += 2; return; } if(sc == 0x42){ f->debug = 0; return; } if(f->debug > 1) fprint(2, "sc: %x %x\n", (esc? SCesc1: 0), sc); s[1] = sc; if(esc && sc != 0) write(kbinfd, s, 2); else if(sc != 0) write(kbinfd, s+1, 1); } static void repeatproc(void* a) { KDev *f; Channel *repeatc; ulong l, t, i; uchar esc1, sc; threadsetname("kbd repeat"); /* * too many jumps here. * Rewrite instead of debug, if needed. */ f = a; repeatc = f->repeatc; l = Awakemsg; Repeat: if(l == Diemsg) goto Abort; while(l == Awakemsg) l = recvul(repeatc); if(l == Diemsg) goto Abort; esc1 = l >> 8; sc = l; t = 500; for(;;){ for(i = 0; i < t; i += 5){ if(l = nbrecvul(repeatc)) goto Repeat; sleep(5); } putscan(f, esc1, sc); t = 30; } Abort: chanfree(repeatc); threadexits("aborted"); } #define hasesc1(sc) (((sc) >= 0x47) || ((sc) == 0x38)) static void putmod(KDev *f, uchar mods, uchar omods, uchar mask, uchar esc, uchar sc) { /* BUG: Should be a single write */ if((mods&mask) && !(omods&mask)) putscan(f, esc, sc); if(!(mods&mask) && (omods&mask)) putscan(f, esc, Keyup|sc); } /* * This routine diffs the state with the last known state * and invents the scan codes that would have been sent * by a non-usb keyboard in that case. This also requires supplying * the extra esc1 byte as well as keyup flags. * The aim is to allow future addition of other keycode pages * for other keyboards. */ static uchar putkeys(KDev *f, uchar buf[], uchar obuf[], int n, uchar dk) { int i, j; uchar uk; putmod(f, buf[0], obuf[0], Mctrl, 0, SCctrl); putmod(f, buf[0], obuf[0], (1<ep->dir); kbdfd = f->ep->dfd; if(f->ep->maxpkt < 3 || f->ep->maxpkt > sizeof buf) kbfatal(f, "weird maxpkt"); f->repeatc = chancreate(sizeof(ulong), 0); if(f->repeatc == nil) kbfatal(f, "chancreate failed"); proccreate(repeatproc, f, Stack); memset(lbuf, 0, sizeof lbuf); dk = nerrs = 0; for(;;){ memset(buf, 0, sizeof buf); c = read(kbdfd, buf, f->ep->maxpkt); assert(f->dev != nil); assert(f->ep != nil); if(c < 0){ rerrstr(err, sizeof(err)); fprint(2, "kb: %s: read: %s\n", f->ep->dir, err); if(strstr(err, "babble") != 0 && ++nerrs < 3){ recoverkb(f); continue; } } if(c <= 0) kbfatal(f, nil); if(c < 3) continue; if(kbdbusy(buf + 2, c - 2)) continue; if(usbdebug > 2 || f->debug > 1){ fprint(2, "kbd mod %x: ", buf[0]); for(i = 2; i < c; i++) fprint(2, "kc %x ", buf[i]); fprint(2, "\n"); } dk = putkeys(f, buf, lbuf, f->ep->maxpkt, dk); memmove(lbuf, buf, c); nerrs = 0; } } static void freekdev(void *a) { KDev *kd; kd = a; if(kd->in != nil){ qlock(&inlck); if(--kd->in->ref == 0){ close(kd->in->fd); kd->in->fd = -1; } qunlock(&inlck); } dprint(2, "freekdev\n"); free(kd); } static void kbstart(Dev *d, Ep *ep, Kin *in, void (*f)(void*), KDev *kd) { uchar desc[512]; int n, res; qlock(&inlck); if(in->fd < 0){ in->fd = open(in->name, OWRITE); if(in->fd < 0){ fprint(2, "kb: %s: %r\n", in->name); qunlock(&inlck); return; } } in->ref++; /* for kd->in = in */ qunlock(&inlck); d->free = freekdev; kd->in = in; kd->dev = d; res = -1; kd->ep = openep(d, ep->id); if(kd->ep == nil){ fprint(2, "kb: %s: openep %d: %r\n", d->dir, ep->id); return; } if(in == &kbdin){ /* * DWC OTG controller misses some split transaction inputs. * Set nonzero idle time to return more frequent reports * of keyboard state, to avoid losing key up/down events. */ n = read(d->cfd, desc, sizeof desc - 1); if(n > 0){ desc[n] = 0; if(strstr((char*)desc, "dwcotg") != nil) kd->idle = Dwcidle; } } if(!kd->bootp) res= setfirstconfig(kd, ep->id, desc, sizeof desc); if(res > 0) res = parsereportdesc(&kd->templ, desc, sizeof desc); /* if we could not set the first config, we give up */ if(kd->bootp || res < 0){ kd->bootp = 1; if(setbootproto(kd, ep->id, nil, 0) < 0){ fprint(2, "kb: %s: bootproto: %r\n", d->dir); return; } }else if(kd->debug) dumpreport(&kd->templ); if(opendevdata(kd->ep, OREAD) < 0){ fprint(2, "kb: %s: opendevdata: %r\n", kd->ep->dir); closedev(kd->ep); kd->ep = nil; return; } incref(d); proccreate(f, kd, Stack); } static int usage(void) { werrstr("usage: usb/kb [-bdkm] [-a n] [-N nb]"); return -1; } int kbmain(Dev *d, int argc, char* argv[]) { int bootp, i, kena, pena, accel, devid, debug; Ep *ep; KDev *kd; Usbdev *ud; kena = pena = 1; bootp = 0; accel = 0; debug = 0; devid = d->id; ARGBEGIN{ case 'a': accel = strtol(EARGF(usage()), nil, 0); break; case 'd': debug++; break; case 'k': kena = 1; pena = 0; break; case 'm': kena = 0; pena = 1; break; case 'N': devid = atoi(EARGF(usage())); /* ignore dev number */ break; case 'b': bootp++; break; default: return usage(); }ARGEND; if(argc != 0) return usage(); USED(devid); ud = d->usb; d->aux = nil; dprint(2, "kb: main: dev %s ref %ld\n", d->dir, d->ref); if(kena) for(i = 0; i < nelem(ud->ep); i++) if((ep = ud->ep[i]) == nil) break; else if(ep->iface->csp == KbdCSP) bootp = 1; for(i = 0; i < nelem(ud->ep); i++){ if((ep = ud->ep[i]) == nil) continue; if(kena && ep->type == Eintr && ep->dir == Ein && ep->iface->csp == KbdCSP){ kd = d->aux = emallocz(sizeof(KDev), 1); kd->accel = 0; kd->bootp = 1; kd->debug = debug; kbstart(d, ep, &kbdin, kbdwork, kd); } if(pena && ep->type == Eintr && ep->dir == Ein && ep->iface->csp == PtrCSP){ kd = d->aux = emallocz(sizeof(KDev), 1); kd->accel = accel; kd->bootp = bootp; kd->debug = debug; kbstart(d, ep, &ptrin, ptrwork, kd); } } return 0; }